Nominal capacity

1250 mm x 1.6 mm (4ft x 16g)

48” (4-foot) length with a maximum capacity of 16 gauge mild steel.

Clamping force (with standard full-length clampbar)

6 Tons  is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.

Recommended for

HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops.
Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications.
Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more.

Eletrical Supply:

1Phase & Pneumatic air supply, 220/240 V ac and will work at virtually any site.

Nominal current:

8 Amp

Duty cycle:

30%

Box Depth

Unlimited

Bend Angle

0-180°

Max. Clamping Bar Lift

Unlimited

Max. Capacity with Extension

18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel

Max. Capacity without Extension

16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel

Thermal Cut-Out

158°F (70°C)

Shipping dimensions

 1.47m x 0.95m x 1.14m = 1.59m3

GW/NW

250kg/230kg

Blade gap adjustment

Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.

adjustable back gauges

Comes with product supports and adjustable back gauges for production runs.

Scaled stroke angle control

lets you deliver repeatable bends time after time.

Notes

Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.

Easy operation

1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material.
4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.

open-ended design

1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake.                                                                                                                          2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn't reliant on conventional finger depths.

Standard accessories

include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.

Optional accessories

available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly

Special tooling

Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling

Operator Safety

Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

MATERIAL (yield/ult. stress)

THICKNESS

LIP WIDTH (minimum)

BEND RADIUS (typical)

Mild Steel
(250/320 MPa)

1.6 mm

30 mm*

3.5 mm

1.2 mm

15 mm

2.2 mm

1.0 mm

10 mm

1.5 mm

Aluminium
Grade 5005 H34
(140.160 MPa)

1.6 mm

30 mm*

1.8 mm

1.2 mm

15 mm

1.2 mm

1.0 mm

10 mm

1.0 mm

Stainless Steel
Grades 304, 316
(210/600 MPa)

1.0 mm

30 mm*

3.5 mm

0.9 mm

15 mm

3.0 mm

0.8 mm

10 mm

1.8 mm