Laser Cutter/Engraver 1390


Working area 1300*900mm
Laser power EFR 150W CO2 laser tube(F6)
Laser head Single head
Control system RD control system
Working table honeycomb working table, Automatic Up and down table, funnel
Red dot pointer Auto focus
Belt 3M
Engraving speed 0-60000mm/min
Motor Leadshine stepper motor and driver
Guide rail PMI Linear square guide rail
Lens & reflectors America II-VI   focus Lens and reflector
Highest scanning precision 2500DPI
Minimum shaping character English 1.0 mm* 1.0mm, Chinese 2.0mm*2.0mm
Water chiller One set of CW5000 Water Chiller
Air pump 160w
Driver Leadshine stepper motor
Laser output control 1-100% set by software
Auxiliary equipment Exhaust fan(550W), air-exhaust pipe
Resetting positioning ≤0.01mm
Working voltage AC 220 Volt, 50 Hz
Graphic format DST,PLT,BMP,DXF,DWG,AI,LAS,etc
Cooling type Water cooling
Working environment Temperature: 0-45℃, Humidity5-95%(No Condensate Water)


  • Three-mirrors and one focal lens path system to deliver outstanding engraving and cutting effects.
  • With auto focus regarding thickness of the object, it can set the optimal focus automatically through the sensor.
  • Open software interface compatible with DXF, ai, PLT, DST, DSB and vector file such as BMP, JPG, GIF, PNG, MNG, equipotential graph format.
  • Water chiller with temperature display and alarm system is installed to avoid over burning. Thus protects the water circulation successful.
  • Automatic up and down table, suit for processing various thickness materials.